Philips M3001A module is IntelliVue MP20, MP30, MP40, MP50, MP60, MP70 monitor the use of a common Measurement ECG/RESP, SPO2, NIBP module (Multi - Measurement Server) physiological parameters.It is a need not make any Settings can be plug and play.Use convenient replacement.It is to monitor the characteristics of human physiological parameters of measuring integration in a module.

     At philips IntelliVue MP20, MP30, MP40, MP50, MP60, MP70 in use process, M3001A MMS fault is the most common fault.

M3001A communicate with the host performance failure are:


1. can't normal communication with host, M3001A module.
Performance is as follows: the host can normal boot, when module is connected, detection did not appear on the screen, RR, HR, NBP characters and ECG waveform baseline, RESP.Most of this kind of circumstance is because M3001A module fault, cause the module to send and receive the signal is not normal, so that will not work.M3001A module can't normal communication with host, is one of the most common failures M3001A M3001A is fault

2. the host screen shows "Ecgout equipment failure alarm prompt, so that the monitor can't learn the rhythm of the heart failure.

3.Restart

4.the host screen display of NBP equipment failure alarm prompt.

5. caused by various reasons to measure the NIBP physiological values of failure

The above fault fault point is as follows:
The cause of the problem
1. M3001A main board or power board failure
2. M3001A motherboard failure
3. M3001 main board or power board failure
4. M3001A module of NBP PUMP components
5 .M3001A module of NBP PUMP components

Yigu Medical service region:
Spot supply philips M3001A MMS maintenance accessories sales: exchange motherboard, power board, blood oxygen board panels, blood pressure, heart plate, plate, M3000-60002 blood pressure components, M3000-60003 blood pressure module;
And M3001A modules, such as common blood oxygen, Masimo SpO2, Nellcor SpO2) exchange software update service